72w Foam Cutter Hot Wire Cutter Working Table Styrofoam Sponge Cutting Machine Foam Cutting Machine

<p>Application</p> <p>It can be used to cut foam, sponge, pearl cotton, ribbon, KT board, etc. It can cut angles, cylinders, sharp cones, rings, cones, straight lines, and other shapes. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p> <p>&nbsp;</p> <p>How to Install</p> <ul> <li>1.&nbsp;Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws.</li> <li>2.&nbsp;Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut.</li> <li>3.&nbsp;&nbsp;Pull out the heating wire about 11.81in from the wire wheel.</li> <li>4.&nbsp;Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machine's bottom. It should not fall off.</li> <li>5.&nbsp;Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic.</li> </ul> <p>&nbsp;</p> <p>Specification&nbsp;</p> <p>Material: Multilayer Board, Stainless Steel, Aluminum Alloy</p> <p>Color: Light Blue, Silver</p> <p>Mount Type: Countertop</p> <p>Assembly Required: Yes</p> <p>Plug Type: US Standard</p> <p>Power Supply: Corded Electric</p> <p>Adapter Input: 100-240V</p> <p>Voltage: 18V &nbsp;&nbsp;&nbsp;</p> <p>Power: 72W</p> <p>Preheating Time: 0-5 Seconds</p> <p>Cutting Height: 0-25cm/0-9.84&nbsp;in</p> <p>Cutting Width: 0-28cm/0-11.02in</p> <p>Cutting Diameter: 0-10cm/0-3.94in</p> <p>Adjustable Bracket Angle Range: 0-180°</p> <p>Power Cord Length: 222.5cm/87.6in </p> <p>Heating Wire Diameter: 0.28mm/0.01in</p> <p>Adjustable Temperature Range: 0~300℃/32~572℉</p> <p>Workboard Size: 39*33cm/15.35*12.99in </p> <p>Package Size: 44.5*11.5*39cm/17.52*4.53*15.35in</p> <p>Gross Weight: 3.3kg/7.27 lbs</p> <p>Net Weight: 3kg/6.61&nbsp;lbs</p> <p>&nbsp;</p> <p>Package&nbsp;Included</p> <p>1* Foam Cutting Machine</p> <p>1* Power Adapter</p> <p>1* English Manual</p> <p>Other Accessories for Assembly</p>

• Robust and Durable: It Is Made of High-quality Multi-layer Panels and Stainless Steel, Which Is Sturdy, Durable, Rust-proof, and Not Easily Deformed, Ensuring a Long Service Life.
• High Efficiency: This High-powered Foam Cutting Machine Features Electric Wire Cutting Which Provides Fast, Accurate, Flat Cuts and Clean Edge Sealing to Increase Your Productivity.
• Precise Cutting: the Worktable Is Thoughtfully Designed with Scales on All Four Sides Making It Easy for You to Accurately Measure Each Piece of Material. the 0.01in Heating Wire Design Allows for More Accurate Cutting and less Error, As Well As a Lower Loss Ratio.
• Adjustable Voltage: the Adapter Has a Voltage Adjustment Knob That Allows You to Adjust the Temperature (0-932°F) by Controlling the Voltage Level for Cutting Different Materials and Thicknesses and Getting Better Cutting Results.
• Adjustable Support: You Can Change the Position of the Electric Wire by Adjusting the Angle of the Support to Cut Different Shapes of Material. the Tilting Angle Allows for Beveled, Vertebral Cuts. When the Holder Is 90 Degrees Perpendicular to the Table, It Can Be Used to Cut Squares, Squares, and Cylinders.
• Easy to Carry: Its Small Size(15.35*12.99in) and Lightweight(6.6lbs) Make It Easy to Take with You When You're on the Go.